Model 16-Base Strut-7 HDG

16″ strut pipe support system used for ganging roof-mounted piping

SKU: 16-B S-7 HDG Category:


A pipestand with a strut and clamp pipe support system used for ganging roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a 16″ length of strut which is mounted on the base. The pipes can then be fastened by using typical clamps locked to the strut.

Base Material: Hot Dipped Galvanized Steel Size: The deck base is 12″ by 16″, has a maximum bar length of 16″. Max Pipe Size: Max Pipe Clearance: Can adjust in height from a low of 2.5″to a high of 7.5″ in elevation above the roof membrane. Max Load Weight: Maximum load weight may not exceed 150 lbs. per pipestand. Spacing: Manufacturers recommended spacing is not to exceed 10 foot centers depending upon the load. Do not exceed 150 lbs. load weight