Model No. 6-RAH-12
For up to 6″ ID and 8.5″ OD pipe. Adjustable clearance height.
A “roller bearing” pipe support used to support roof mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating roller which is a 304 stainless steel rod and a polycarbonate resin roller. The pipe support base is made of sturdy polycarbonate resin, the roller is polycarbonate and all metal parts are made of stainless steel. Pipestand will accommodate up to 6″ inside diameter pipe or up to 8.5″ outside diameter pipes.
|The deck is 16″ x 18″ and has a maximum cradle width of 8.5″.
|Max Pipe Size:
|6″ inside diameter and 8.5 outside diameter.
|Max Pipe Clearance:
|Can adjust in height from a low of 4.5″ to a high of 12″ in elevation above the roof membrane.
|Max Load Weight:
|Maximum load weight may not exceed 385 lbs. per pipestand
|Manufacturer’s recommended spacing is not to exceed 10 foot centers depending on the load.