Model 3-RAH-7 | Base: Polycarbonate
For up to 3″ ID and 3 3/4″ OD pipe. Adjustable clearance height.
Downloads
Polycarbonate
Description
A “roller-bearing” pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating polycarbonate resin roller rod and roller. The pipe support base is made of polycarbonate resin, the supporting all-thread and all metal parts are made of stainless steel. Pipestand will accommodate up to 3″ pipe (inside diameter) or up to 3 3/4″ (outside diameter) pipes.
| Base Material: | Polycarbonate, Stainless Steel or Hot Dip Galvanized |
| Size: | The deck base is 7.50″ by 10″ and has a maximum cradle width of 4″. |
| Max Pipe Size: | 3″ inside diameter and 3.75″ outside diameter. |
| Max Pipe Clearance: | The 3-RAH-7 can adjust in height from a low of 3.5″ to a high of 7″ in elevation above the roof membrane. |
| Max Load Weight: | Maximum load weight may not exceed 115 lbs. per pipestand (Polycarbonate). |
| Spacing: | Manufacturer’s recommended spacing is not to exceed 10 foot centers depending upon the load. |
Installation Photos
Reviews
There are no reviews yet.