Model 16-Base Strut-12
16″ strut pipe support system used for ganging roof-mounted piping
Downloads
Description
A pipestand with a strut and clamp pipe support system used for ganging roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a 16″ length of strut which is mounted on the base. The pipes can then be fastened by using typical clamps locked to the strut.
| Base Material: | Polycarbonate |
| Size: | The deck base is 9″ by 15.25″, has a maximum bar length of 16″. |
| Max Pipe Size: | |
| Max Pipe Clearance: | Can adjust in height from a low of 2.5″ to a high of 12″ in elevation above the roof membrane. |
| Max Load Weight: | Maximum load weight may not exceed 223 lbs. per pipestand. |
| Spacing: | Manufacturers recommended spacing is not to exceed 10 foot centers depending upon the load. |
| Installation Photos: |
