Description
A pipestand with a strut and clamp pipe support system used for ganging roof mounted gas pipes, electrical
conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a 20″ length of strut which is mounted on the base. The pipes can then be fastened by using typical clamps locked to the strut. The pipe support base is made of polycarbonateresin; and the strut is made of hot-dip galvanized steel.
| Base Material: | Polycarbonate |
| Size: | The deck base is 16″ by 18″, has a maximum bar length of 20″. |
| Max Pipe Size: | |
| Max Pipe Clearance: | The 20-Base Strut-7 can adjust in height from a low of 4.5″ to a high of 7″ in elevation above the roof membrane. |
| Max Load Weight: | Maximum load weight not to exceed 380 lbs. per base. |
| Spacing: | Manufacturer’s recommended spacing should not exceed 10 foot centers depending upon the load. |
