Description
A “roller-bearing” or “clevis hanger” pipe support hanger used to support roof-mounted gas pipes, HVAC piping, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a polycarbonate or steel roller hanger or clevis hanger. The pipe support base is made of hot-dip galvanized steel and all other metal parts are made of hot-dip galvanized steel.
| Base Material: |
Galvanized |
| Size: |
Each of the two deck bases is 12″ by 16″, and has a cradle width which allows at least 18″ between the strut assembly. |
| Max Pipe Size: |
|
| Max Pipe Clearance: |
The 8-H series and its related configurations allow adjustable height as desired or required by the code or roof system. Cross-bracing two adjacent pipe stands are required for elevations 36” and higher. Purchasers must specify desired heights and multiple pipe centerline spacing upon quote requests and ordering of 8-H series stands. |
| Max Load Weight: |
The 8-H series support is engineered to ensure member/component capacities and deflection criteria are not exceeded. Maximum loading from any MIRO base to the finished roof surface is not to exceed 2.0 psi unless specifically allowed otherwise in the project specification. Deflection in the horizontal header bar is not to exceed the span length divided by 360 or 1/8″. |
| Spacing: |
Manufacturer’s recommended spacing is not to exceed 10 foot centers depending upon the load. |
