Description
A “roller-bearing” or “clevis hanger” pipe support hanger used to support roof-mounted gas pipes, HVAC piping, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a polycarbonate or steel roller or clevis hanger. The pipe support base is made of polycarbonate resin, stainless steel and hot dip galvanized and all metal parts are made of stainless steel or hot-dip galvanized steel.
| Base Material: | Polycarbonate, Stainless Steel and Hot Dip Galvanized |
| Size: | Each of the two deck bases are 9″ by 15.25″. |
| Max Pipe Clearance: | The strut is 1-5/8″ x 7/8″, the strut assembly is constructed at various heights to give pipe clearance adjustment above the roof. |
| Max Load Weight: | The 6-H series support is engineered to ensure member/component capacities and deflection criteria are not exceeded. Maximum loading from any MIRO base to the finished roof surface is not to exceed 2.0 psi unless specifically allowed otherwise in the project specification. Deflection in the horizontal header bar is not to exceed the span length divided by 360 or 1/8″. |
| Spacing: | Manufacturer’s recommended spacing is not to exceed 10 foot centers depending upon the load. |
6-H Configurations
6-H Clevis Hanger |
 |
6-H Double Clevis Hanger |
 |
6-H Roller Hanger |
 |
6-H Double Roller Chair |
 |
6-H Stainless Steel |
