Model 12-Base Strut-7 HDG

Description

A pipestand with a strut and clamp pipe support system used for ganging roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a 12″ length of strut which is mounted on the base. The pipes can then be fastened by using typical clamps locked to the strut.

Base Material: Galvanized Size: The deck base is 12″ by 16″ , has a maximum bar length of 12″. Max Pipe Size: Max Pipe Clearance: Can adjust in height from a low of 2.5″ to a high of 7.5″ in elevation above the roof membrane. Max Load Weight: Maximum load weight may not exceed 150 lbs. per pipestand. Spacing: Manufacturer’s recommended spacing is not to exceed 10 foot centers depending upon the load. Do not exceed 100 lbs. load weight.